On the basis of DYNAMICS Scientific & Production Center (SPC) an enlarged meeting of a conjoint Working Group of Non-profit Organization "Siberian Engineering" was held
Meeting of conjoint Working Group for formulation of priority proposals for design, manufacture and implementation of the equipment, systems, devices and use of innovation engineering of subprogram "Siberian Engineering - Fuel and Energy Complex" in the interests of "Territorial Generation Company №11" JSC ("TGC—11" JSC) was held 13 April 2011.
At the meeting, which was held in the format of open business communication, Omsk powermen talked about problems arising from the operation of equipment. The representatives of Heating Electrical Stations – 2, 3, 4, 5, "Heating Systems" Organization Department were spoken on behalf of "TGC-11" JSC.
The representatives of Omsk enterprises in turn presented the ways of solving the following problems:
DYNAMICS SPC presented the results and potential of vibration monitoring and condition diagnostics of rotating and static equipment of thermal stations and substations of "TGC-11" JSC y the COMPACS® systems;
Research and Development Centre "Computer World" presented the resources of optimization of production purchase for "TGC-11" JSC use by electronic system of a commodity market through Electronic Transactions System web-site;
Siberian Branch of Russian Academy of Sciences "Institute of Hydrocarbon Processing Problems" spoke about the technology of efficient refinement and dehydration of oils;
Scientific Production Association Mir - about the resources of modernization of telemechanics system at the facilities of Omsk branch of "TGC-11" JSC;
"Engineering Office of Transport Machinery" JSC - about efficiency of selection and replacement of network and feeding pumps by more efficient ones, and the development of a reliable scheme for warm-up of feeding pumps with face seals, about revamp of the filters of circulation and technical water in order to improve the quality and ease of maintenance;
Production Association Polyot – about the selection and replacement of heat exchangers by more efficient ones;
Production Association Electrotochpribor – about implementation of the system for energy-saving lighting of the perimeter of "TGC-11" JSC organization departments;
Research and Development Centre Electronik offered the devices for "TGC-11" JSC use.
In final speech N.P. Rybko (chief engineer of Omsk branch of JSC "TGC-11") and V.V. Zhilcov (Director General of Non-profit Organization "Siberian Engineering") noted a positive result of the meeting and decided to develop and afterwards implement actions for solving of the problems discussed.
DYNAMICS SPC participate in "COMADEM 2011" held from 30th May to 1st June
"COMADEM 2011" is the 24th International Congress on Condition Monitoring and Diagnostics Engineering Management held in Stavanger, Norway. The congress will cover all aspects of performance monitoring, health management, failure diagnosis, risk, reliability, maintenance, etc. The congress organizers are Det Norske Veritas and Centre for Industrial Asset Management (CIAM), University of Stavanger, Norway.
Evgeny V. Tarasov and Alexander P. Naumenko will represent DYNAMICS SPC at "COMADEM 2011". Both participants have already been included in the List of Presentations. Evgeny V. Tarasov will speak on the theme "Condition monitoring and diagnostics of rolling bearings of high-voltage electric motors during their operation", and Alexander P. Naumenko will make a report on the theme "Choice of reciprocating compressors units for real time health monitoring".
DYNAMICS SPC participate in CM 2011 and MFPT 2011 held 20-22 June
CM 2011 and MFPT 2011 is the Eighth International Conference on Condition Monitoring and Machinery Failure Prevention Technologies held in Cardiff, UK. The Conference is being organized by British Institute of Non-Destructive Testing (BINDT) in close co-operation and partnership with the US Society for Machinery Failure Prevention Technology (MFPT). The BINDT is the internationally-recognized focal point for condition monitoring (CM) and non-destructive testing (NDT). It is the professional institute for all those engaged in CM and NDT. It is concerned with education, training, certification and the advancement of the science and practice of the subjects. The MFPT Society is an interdisciplinary technical organization strongly oriented toward practical applications. It acts as a focal point for technological developments that contribute to mechanical failure reduction or prevention.
Prof Vladimir N. Kostyukov is the organizer of Structured Session under the name "Real time condition monitoring of equipment". The reports of Alexander P. Naumenko, Alexander I. Kumenko and Alexey V. Kostyukov are included in this Structured Session as well.
The list of reports that will be presented in the framework of the Structured Session organized by Prof Vladimir N. Kostyukov:
"Real-time condition monitoring of machinery by the recurrent selection of the noise and periodic components of vibration" (Vladimir N. Kostyukov)
"Computer simulation of the shafting’s dynamic properties in vibration diagnosing and eliminating in turbine and generator of 300-800 MW" (Alexander I. Kumenko)
"Classification of vibration parameters trends for RTCM (real-time condition monitoring)" (Alexey V. Kostyukov)
"Modern methods and means of on-line monitoring of parameters and real-time health monitoring of piston machines" (Alexander P. Naumenko)
DYNAMICS SPC participated in V International research and practice conference "Industrial Safety at Fire Explosive and Chemically Hazardous Production Facilities. Technical Supervision, Diagnostics and Expertise"
The conference was held from 16 to 18 March 2011 at Ufa State Oil Technical University under the auspices of "Gazprom Neftekhim Salavat" JSC.
More than 200 representatives of the largest enterprises and institutes of republic, other regions of the country, countries near and far abroad participated in the conference. About 30 reports on the problems in the field of industrial safety, control and monitoring were presented.
The First Deputy Director General A. V. Kostyukov spoke on behalf of DYNAMICS SPC with the report "Modern systems for condition monitoring of process equipment of refineries and petrochemical industries". The conference was held at high scientific and technical level.
DYNAMICS SPC products were presented at "Promtechexpo" forum of the winners of "100 Best Products" contest
The organizer of "Promtechexpo" forum is International Exhibition Centre Intersib. The forum was held in Omsk from 16 to 18 March 2011 with the support of the Ministry of Industrial Policy of Omsk Region, Russian Union of Industrialists and Entrepreneurs, Emergencies Ministry and the Department of Internal Affairs of Russia.
The winners of "100 Best Products – 2010" participated in collective exhibition of Federal State Institute "Omsk Center of Standardization, Metrology and Certification". DYNAMICS SPC displayed seven winning devices:
COMPACS®-RPP stand system for vibration analysis of rolling bearings is designed for objective evaluation of rolling bearing technical condition and automatic detection of defects which influence their lifetime.
Vibration calibrator 8001, which calibrates vibration-measuring devices and vibration-measuring transducers in laboratories and on-site.
Calibrator 8003 is designed for inspection and calibration of the systems and devices, which measure the parameters of vibration, voltage, direct and alternating current intensity as well as temperature in laboratories and on-site.